22,85  (sis. KM)

Laost otsas

Tootekood: 1726206-2RS1 Kategooriad: ,

Kirjeldus

1726206-2RS1
Insert bearing, with standard IR, sealed 2RS1
Insert bearings are based on sealed deep groove ball bearings. These insert bearings are suitable for applications where smooth running is a key operational parameter. It can accommodate heavier axial loads than any other insert bearing. The bearings are seald on both sides, made of sheet steel reinforced NBR, and are fitted in a recess on the outer ring and ride against the inner ring shoulder to act as contact seals.
Smooth running
Can accommodate havy axial loads
Seald on both sides

DIMENSIONS
Bore diameter 30 mm
Outside diameter 62 mm
Width, total 16 mm
Width, inner ring 16 mm
Width, outer ring 16 mm

PERFORMANCE
Basic dynamic load rating 19.5 kN
Basic static load rating 11.2 kN
Limiting speed 7500 r/min

PROPERTIES
Retaining feature, inner ring Interference fit
Bore type Cylindrical
Rolling elements Balls
Outer ring type Spherical
Inner ring extension None (standard ring)
Cage Non-metallic
Rubber seating ring Without
Material, bearing Bearing steel
Coating Without
Sealing Seal on both sides
Sealing type Contact, RS1
Lubricant Grease
Relubrication feature Without

RECOMMENDED PRODUCT
Rubber seating ring for insert bearing RIS 206 A