2392,01 

Laost otsas

Tootekood: TKBA 20 Kategooria:

Kirjeldus

TKBA 20
SKF Belt Alignment Tool TKBA 20
The SKF Belt Alignment Tool TKBA 20 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.
Powerful magnets for fast and easy attachment
Facilitates simultaneous adjustment of tension and alignment
Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
Highly visible green laser for outdoor usage in sunny conditions with measurement distances up to 6 m (20 ft)
Sturdy aluminium housings help ensure assembly stability and accuracy during the alignment process

PROPERTIES
Battery 2x AAA Alkaline type IEC LR03
Battery life 8 hours continuous operation
Certifications Calibration certificatw with two year validity
Contents 1x TKBA 20 transmitter unit;1x TKBA 20 receiver unit;2x AAA batteries;1x Printed instructions for use;1x Calibration certificate
Housing material Aluminium, powder coat finish
Laser power <1 mW, class 2
Laser type Visible green line laser
Laser wavelength 532
Mounting Magnetic, side mounted
Protection class IP40
Relative humidity 10 to 90%, non-condensing
Total weight (incl. case) 1.3