134,10  (sis. KM)

Laost otsas

Tootekood: 7310BE-2RZP Kategooriad: ,


7310 BE-2RZP
Single row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
These single row angular contact ball bearings, with 40° contact angle and non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They have a ball-centred glass-fibre reinforced PA66 cage. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
40° contact angle
Integral sealing prolongs bearing service life
Glass-fibre reinforced PA66 cage
Accommodate relatively high radial loads and large unilateral axial loads

Bore diameter 50 mm
Contact angle 40 °
Outside diameter 110 mm
Width 27 mm

Basic dynamic load rating 68.9 kN
Basic static load rating 47.5 kN
Limiting speed 6000 r/min
Reference speed 7500 r/min

Axial internal clearance Not applicable
Cage Non-metallic
Coating Without
Contact type Normal contact (two-point contact)
Locating feature, bearing outer ring None
Lubricant Grease
Matched arrangement No
Material, bearing Bearing steel
Number of rows 1
Relubrication feature Without
Ring type One-piece inner and outer rings
Sealing Seal on both sides
Sealing type Non-contact
Universal matching bearing No