Laost otsas

Tootekood: 7205.BEP-2RZ Kategooriad: ,


7205 BEP.2RZ
Single row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
These single row angular contact ball bearings, with 40° contact angle and non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
40° contact angle
Integral sealing prolongs bearing service life
Accommodate relatively high radial loads and large unilateral axial loads

Bore diameter 25 mm
Contact angle 40 °
Outside diameter 52 mm
Width 15 mm

Basic dynamic load rating 14.8 kN
Basic static load rating 9.3 kN
Limiting speed 12000 r/min

Axial internal clearance Not applicable
Cage Non-metallic
Coating Without
Contact type Normal contact (two-point contact)
Locating feature, bearing outer ring None
Lubricant Grease
Matched arrangement No
Material, bearing Bearing steel
Number of rows 1
Relubrication feature Without
Ring type One-piece inner and outer rings
Sealing Seal on both sides
Sealing type Non-contact
Universal matching bearing No