2 laos

Tootekood: 7215.BEP Kategooriad: ,


7215 BEP
Single row angular contact ball bearing
These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
High-speed capability
Accommodate relatively high radial loads and large unilateral axial loads

Bore diameter 75 mm
Contact angle 40 °
Outside diameter 130 mm
Width 25 mm

Basic dynamic load rating 70.2 kN
Basic static load rating 60 kN
Limiting speed 5600 r/min
Reference speed 6000 r/min

Axial internal clearance Not applicable
Cage Non-metallic
Coating Without
Contact type Normal contact (two-point contact)
Locating feature, bearing outer ring None
Lubricant None
Matched arrangement No
Matched condition (axial clearance/ preload)
Material, bearing Bearing steel
Number of rows 1
Radial internal clearance
Relubrication feature Without
Ring type One-piece inner and outer rings
Sealing Without
Sealing type Not applicable
Universal matching bearing No