142,74  (sis. KM)

Laost otsas

Tootekood: FY 60 TF Kategooriad: ,


FY 60 TF
Square flanged ball bearing unit with set screw locking, cast iron housing, ISO
These square flanged ball bearing units are compliant with ISO standards. They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for high temperatures and speeds
Accommodate relatively heavy loads

Shaft diameter 60 mm
Housing overall width 52 mm
Width, total 73.7 mm
Centre distance between bolt holes 143 mm
Bearing width, total 65.1 mm

Basic dynamic load rating 52.7 kN
Basic static load rating 36 kN
Limiting speed 3400 r/min
Note Limiting speed with shaft tolerance h6

Housing type Flanged
Flanged housing type Square
Number of bolt holes for fasteners 4
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole With
Grease fitting With

Square flanged housing for insert bearings, cast iron FY 512 M
Insert bearing with set screw locking and extended inner ring YAR 212-2F

End cover for bearing units ECY 212