39,53 € (sis. KM)
Laost otsas
FB206 + UC206
Kirjeldus
UCFB 206
Three-bolt bracket flanged ball bearing unit with an extended inner ring and set screw locking, cast iron, JIS standards
These three-bolt bracket flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for hightemperatures and speeds
Accommodate relatively heavy loads
Cost-effective
DIMENSIONS
Bearing width, total 38.1 mm
Housing overall width 30 mm
Shaft diameter 30 mm
PERFORMANCE
Basic dynamic load rating 19.5 kN
Basic static load rating 11.2 kN
Limiting speed 5000 r/min
PROPERTIES
Bore type Cylindrical
Coating Without
Fastening bolt hole type Plain
Flanged housing type 3-bolt bracket
Housing type Flanged
Lubricant Grease
Material, bearing Bearing steel
Material, housing Cast iron
Number of bolt holes for fasteners 3
Relubrication hole With
Relubrication nipple With
Retaining feature, inner ring Set screws
Rubber seating ring Without
Sealing type Contact
Sealing, bearing Seal and flinger on both sides
Sealing, unit Without