37,88  (sis. KM)

2 laos (Laki 26)

Tootekood: SYJ 30 TF Kategooriad: ,


Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
Ready to mount
Designed for a constant and alternating rotation
Lubricated and sealed bearing
Quick locking onto the shaft

Bearing width, total 38.1 mm
Centre distance between bolt holes 118 mm
Centre height (pillow block) 42.9 mm
Housing overall width 42 mm
Shaft diameter 30 mm

Basic dynamic load rating 19.5 kN
Basic static load rating 11.2 kN
Limiting speed 6300 r/min

Bore type Cylindrical
Coating Without
Fastening bolt hole type Plain
Housing type Pillow block
Lubricant Grease
Material, bearing Bearing steel
Material, housing Cast iron
Number of bolt holes for fasteners 2
Relubrication hole With
Relubrication nipple With
Retaining feature, inner ring Set screws
Rubber seating ring Without
Sealing type Contact, standard
Sealing, bearing Seal and flinger on both sides
Sealing, unit Without