LIIGENDLAAGER d-16MM , ISANE, HEAVY DUTY BRTM 16-00-501 -DURBAL-

Kirjeldus

DURBAL heavy-duty rod ends with integral self-aligning roller bearing, series K, male thread, according to DIN ISO 12240-4, cage design
Right hand thread: BRTM_-00-501 and left hand thread: BRTM_-00-502

Housing: forged steel, case hardened bearing race, superfinished, rolled thread, surface galvanized, free of Cr VI
Inner ring: ball bearing steel, hardened, superfinished
Rolling element: ball bearing steel, hardened, superfinished

Maintenance: low maintenance, lubrication possible, aluminium-complex-soap-grease, approval according to USDA H1
Grease nipple: DIN 3405 D1/A (until size 10) / DIN 71 412 H1 (from size 12), further grease nipples see on this page
Temperature range: -45° C to +120° C

Special characteristics:

For high speeds, wide swivelling angles or rotating movements,
High loads,
All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple.
Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.