60,70 

Kaherealine kuullaager tihendite või kilpidega
Kaherealised kuullaagrid koos tihendite või kilpidega vastavad üherealistele kuullaagrite paarile, mis on paigutatud üksteise vastu, nõudes samal ajal vähem aksiaalset ruumi. Olenevalt tihenduse teostusest võivad need töötada suurel kiirusel ja on sügava soonega kuullaagritest sobivamad mõlemas suunas suurte aksiaalsete jõudude toetamiseks.

19 laos

Tootekood: 3206 A-2RS1TN9/C3MT3 Kategooriad: ,

Kirjeldus

3206 A-2RS1TN9/C3MT33
Double row angular contact ball bearing with seals or shields
Double row angular contact ball bearings, with seals or shields, correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. Depending on the sealing execution, they can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.
High-speed capability
Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
Suitable where a stiff bearing arrangement is required
Require less axial space than equivalent pair of single row angular contact ball bearings
Integral sealing prolongs bearing service life

DIMENSIONS
Bore diameter 30 mm
Contact angle 30 °
Outside diameter 62 mm
Width 23.8 mm

PERFORMANCE
Basic dynamic load rating 30.5 kN
Basic static load rating 22 kN
Limiting speed 7500 r/min
Reference speed

PROPERTIES
Arrangement of contact angle (double-row bearing) Back-to-back (O)
Axial internal clearance C3
Cage Non-metallic
Coating Without
Contact type Normal contact (two-point contact)
Locating feature, bearing outer ring None
Lubricant Grease
Matched arrangement No
Matched condition (axial clearance/ preload)
Material, bearing Bearing steel
Number of rows 2
Radial internal clearance
Relubrication feature Without
Ring type One-piece inner and outer rings
SKF performance class SKF Explorer
Sealing Seal on both sides
Sealing type Contact
Universal matching bearing No