8,88  (sis. KM)

4 laos (Laki 26)

Tootekood: 6741 Kategooriad: ,

Kirjeldus

6741
Radial shaft seal with metal case and SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
For oil or grease
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point

DIMENSIONS
Shaft diameter 17.48 mm
Housing bore diameter 28.55 mm
Seal width 6.35 mm

PERFORMANCE
Maximum operating temperature 100 °C
Minimum operating temperature -40 °C
Permissible circumferential speed 3.58 m/s
Rotational speed 3900 r/min

PROPERTIES
Design CRW1
Auxiliary lip No
Sealing lip material Nitrile rubber (NBR)
Type of outside diameter Metal-cased with sealant coating on the outside diameter
Unit system Inch