2,99 €
10 laos (Laki 26)
Radiaalvõlli tihendeid kasutatakse pöörlevate ja statsionaarsete masinaosade või suhtelise liikumisega komponentide vahel.
Kirjeldus
Acrylonitrile-butadiene rubber – NBR Among standard seals such as O-rings and radial shaft seals, NBR is the most widely used material. The reasons for this are good mechanical properties, high abrasion resistance, low gas permeability and the high resistance to mineral oil based oils and greases. NBR is a copolymer of butadiene and acrylonitrile. Depending on the application, the content of acrylonitrile can vary between 18% and 50%. Low ACN content improves cold fl exibility at the expense of the resistance to oil and fuel. High ACN content improves the resistance to oil and fuel while reducing the cold fl exibility and increasing compression set. To obtain balanced properties, our standard NBR materials have an average ACN content around 30%.
NBR has good resistance to:
mineral oil-based oils and greases
aliphatic hydrocarbons
vegetable and animal oils and fats
hydraulic oils H, H-L, H-LP
hydraulic fl uids HFA, HFB, HFC
silicone oils and silicone greases
water (max. 80°C)
NBR is not resistant to:
fuels with high aromatic content
aromatic hydrocarbons
chlorinated hydrocarbons
non-polar solvents
hydraulic fl uid HFD
glycol-based brake fl uids
ozone, weathering, ageing
Application temperature range:
Standard types -30°C to +100°C (short term 120°C)
Special grades possible down to -50°C
